Turbo-FloTM probes offer the precision of turbine technology with rugged construction. The practical design of the probe includes a bluff bar which protects the turbine from foreign materials in the stream as well as from over insertion. Installation is simple and does not require special fittings. The Turbo-FlTM probe may be installed in standard pipe tees, through pipe saddles, welding spuds and 1 1/₂” full opening ball or gate valves.

Accuracy: ±1.0%

Repeatability: ±0.5%

Linearity: ±0.5%

Turndown: 30:1

Insertion length:

06 = 6 inches
08 = 8 inches
12 = 12 inches
18 = 18 inches
24 = 24 inches
38 = 38 inches
54 = 54 inches

Threshold:

0.5 ft/s or
1.22 x ID2 = GPM

Point Velocity = 2.625 pulses/ft/s

Pulse/gallon correction for uncharted pipe diameters =
ID2 charted pipe; ID2 uncharted pipe  X  Pulse/gallon charted pipe

Materials of Construction:

Probe:  304 stainless steel

Connector: Steel or 303sst

Turbine: Delrin® Polypropylene

O-rings:  Buna-n or Viton®

Temperature Limits:  225°F(107°C)

Pressure Limits:  400 psig (27.6 barg)

Options :